Edgar Tolentino

Working in Singapore for more than 10 years as a Mechanical & Electrical Draftsman uisng Microstation and autocad.

Mechanical & Electrical Draftsman cum Coordinator 

GS Engineering & Construction (Singapore)

01 July 2016 to Present 

Software Used: Microstation V8i and Navisworks 

Project: Contract T301 East Coast Integrated Depot and Reception Tunnels

•     Prepare coordination drawings (CSD & SEM) in the construction of 4-IN-1 Rail and Bus Depot (T301)

•     Coordinate/Liaise with SWC on the general arrangements of all M&E services.

•     Prepare drawings and sketches to support construction work as required.

•     Prepare As-Built drawings submissions.

•     Perform additional assignments and responsibilities as assumed or requested.

•     Prepare request for SWC site inspection/clearance for concrete casting.

Mechanical & Electrical Draftsman cum Coordinator

GS Engineering & Construction (Singapore)

10 Nov. 2011 to 30 June 2016

Software Used: Microstation V8i and AutoCad

Project: Contract C925 Tampines East Station

•     Prepare coordination drawings (CSD & SEM) in the construction of Tampines East Station (C925A)

•     Coordinate/Liaise with SWC on the general arrangements of all M&E services.

•     Prepare drawings and sketches to support construction work as required.

•     Prepare As-Built drawings submissions.

•     Perform additional assignments and responsibilities as assumed or requested.

Mechanical & Electrical Draftsman 

Sembawang Engineers & Constructors (Singapore)

01 Dec. 2010 to 09 Nov. 2011 

Software Used: Microstation V8 & AutoCAD 

Project: Contract C856 Construction of West Coast, Pasir Panjang, Labrador, Telok Blangah and Harbour front station

•     Coordinates the preparation of shop drawings (CSD & SEM) for tunnel & station. 

•     Prepares M&E coordination drawings.

•     Attend project coordination meeting with consultants as requested or as required. 

•     Prepares drawings and sketches to support construction work as required. 

•     Prepares As-Built drawings submissions. 

•     Perform additional assignments and responsibilities as assumed or requested. 

Electrical Draftsman

Powen Electrical Engineering Pte Ltd (Singapore)

15 Apr. 2010 to 31 Nov. 2010 

Software Used: Microstation V8 & AutoCAD 

•     Coordinates the preparation of electrical drawings such as power layout, lighting layout, lightning layout and other electrical drawings 

•     Prepares mechanical drawing such as ACMV layout, sanitary & plumbing layout, fire protection layout and other mechanical drawings 

•     Prepares the CSD & SEM drawing. 

•     Attend project coordination meeting with consultants as requested or as required. 

•     Prepares drawings and sketches to support construction work as required. 

•     Prepares As-Built drawings submissions. 

•     Perform additional assignments and responsibilities as assumed or requested.

M&E Designer/ Senior Drafter

HITECH Engineering Management Consultant (Singapore)

29 July 2009 to 14 Apr. 2010 

Software Used: AutoCAD & DIALux 

•     Prepares single line diagram, lighting layout, power layout and other electrical drawing. 

•     Prepare & design drawing for sprinkler and smoke detector layout. 

•     Prepare & design potable water and sanitary layout & schematic diagram. 

•     Perform additional assignments and responsibilities as assumed or requested. 

Cadd Operator (Electrical, Mechanical & Architectural) 

Al-Hejailan Consultants-Design & Management (Saudi Arabia)

February 2007 to February 2009 

Position: Software Used: Microstation V8 & AutoCAD 

•     Prepares single line diagram, panel schedule, lighting layout, power layout, grounding layout, site area lighting. 

•     Conduct survey and design of overhead power line(13.8kv) and cathodic protection for oil & gas wells in various areas. 

•     Prepares drawing for overhead power line routing. 

•     Prepares architectural drawings (plan, section & elevation). 

•     Prepares mechanical drawing (fire protection, hvac & plumbing layout). 

•     Perform additional assignments and responsibilities as assumed or requested. 

Electrical CAD Engineer (Electrical, Mechanical & Architectural)

Aceplp.com Pte Ltd  (Singapore)

November 2004 to August 2006 

Software Used: Microstation V8 & AutoCAD 

•     Prepares single line diagram, panel schedule, lighting and power layout. 

•     Planning cable raceway/ conduit routing to field panels and determine the size and elevation of cable tray. 

•     Prepares 2D drawings layout by extracting from 3D model. 

•     Prepares section, elevation and detail of cable tray routing. 

•     Perform additional assignments and responsibilities as assumed or requested.

Bachelor of Science in Electrical Engineering 

Graduated – October 2002 

Adamson University, Manila, Philippines 

Passed the Registered Electrical Engineering Licensure Examination September 2003